Low Power High Air Flow Fans
24.50 USD
Description
A. General Specification
| Item | Specification | Condition |
|---|---|---|
| Model No. | D12025V12XLB-A | |
| Outline Dimension | 120 x 120 x 25 mm | |
| Rated Voltage | DC 12 V | |
| Operating Voltage Range | DC 10.8 ~13.2 V | |
| Start Voltage | DC 7 V | |
| Rated Current | 0.11(Max0.13) A 10% | At Rated Voltage,25°C, 65% RH, Free Air |
| Power Consumption | 1.32(Max1.56) W 10% | |
| Rotating Speed | 1500 RPM ±10% | |
| Max. Airflow | 57.2 CFM1.618 m3/min | At Rated Voltage AMCA 210 Standard At Rated Current |
| Max. Static Pressure | 1.879 mmH2O 0.074 inchH2O |
|
| Noise Level | 27.2(Max 31.2) dB(A) | At Rated Voltage Measured in a non-echo Chamber CNS 8753 Standard ISO 3744 Test Condition |
| Life | 50000 hrs at 25°C | MTTF (Mean Time To Failures) at Confidence. Level 90% |
| No. of Blade | 7 Blades | |
| No. of Pole | 4 Poles | |
| Rotating Direction | Clockwise View From Label Side | |
| Weight | 156 g | |
| Motor Type | DC Brushless Fan Motor | |
| Speed Control | N/A | |
| Signal Output | N/A | |
B. Main Materials / Parts Specification
| Materials / Parts | Specification |
|---|---|
| Housing | Thermoplastic PBT, UL94V-0 |
| Blade, Bobbin | Thermoplastic PBT, UL94V-0 |
| Bearing | Ball Bearing |
| Termination | Lead Wires ( )Red, (-)Black, UL1007 AWG#24 Length:300± 10mm |
| Connector | N/A |
C. Safety Approvals
| Safety Approvals | UL | TUV |
|---|---|---|
| Housing | N/A | N/A |
D. Environmental Specification
| Item | Specification / Condition |
|---|---|
| Operating Temp. Range | -10 ? to 70 ? at humidity 65% /-20% RH. |
| Storage Temperature | All function shall be normal after 500 hours storage at -40? to 70 ? with a 24 hour recovery period at room temperature |
| Humidity Test | After 96 hours, 95% RH, 40 /-2°C per MIL-STD-202F, method 103B humidity test, the measured data on insulation resistance and dielectric strength shall meet the specification. |
| Thermal Shock | Per MIL-STD 202F Method 107D, Condition D |
| Insulation Shock | Class A |
E. Electrical Specification
| Item | Specification / Condition |
|---|---|
| Insulation Resistance | 10M?/Between unshielded wire and frame at 500 VDCmin |
| Dielectric Strength | 5mA Max./Measured bw lead wire ( ) and frame at 500 VACmin |
| Motor Safety Protection | Open circuit when VCC&GND are exchanged |
| Circuit won’t be burned within 5seconds when VCC&GND are exchanged | |
| Locked rotor Protection | Built-in controller will begin to motivate the fan motor to get it start rotating again when the fan speed suddenly drops to zero in a stuck state |
T: 1-905-751-1362
E: tecteg@rogers.com